:YamahaRTX1100
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
単語検索
|
最終更新
|
ヘルプ
]
開始行:
#contents
*初期設定 [#x7914937]
-起動してみる。動作するなら問題なし。
-パスワードがわからないのでハードウェア側から初期化する。
**ハードウェアからの初期化 [#k467489e]
-背面パネルにあるINITボタンを押しながら電源を入れる。
-製品によってはリセットボタンを備えているので、INITボタン...
-//すべての設定を工場出荷時に戻す。
-以上
**ソフトウェアからの初期化 [#g26d8665]
-ログインできるのであれば以下のコマンドを実行する。
-#cold start //Password入力画面でパスワードを入力する。...
-//不揮発メモリを工場出荷時に戻して再起動する。
**再起動 [#h990158c]
-#restart //現在の不揮発メモリの内容に従い再起動する。
**パスワード設定 [#t5243317]
-コンソールパスワード
--#login password
-暗号化したコンソールパスワード
--#login password encrypted
-管理パスワード
--#administrator password
-暗号化した管理パスワード
--#administrator password encrypted
**ログインタイマーを伸ばす [#j6ee4398]
-login timer 3000 //初期値300
*時刻設定 [#d69d9d77]
-タイムゾーンの設定
--#timezone JST //JST UTC(世界標準時)を指定する
-日付の設定
--#date 2012-07-25 //2012/07/25も可。yyyy-mm-dd or yyyy/...
-時刻の設定
--#time 15:45:00 //hh:mm:ss
-NTPによる設定
--#ntpdate 192.168.136.152 //NTPサーバのIPを指定する
*設定 [#s559115d]
-設定の保存
--#save //0-4の数値を指定することができる。
-設定の確認
--#show config //全体の確認。
--#show config list //保存した設定の確認。
-設定の消去
--#delete config 番号
*インターフェースにIPを割り当てる [#z0002d66]
LAN1=1-4, LAN2, LAN3の構成になっている
LAN2をWANとして192.168.136.150/24
LAN1をLANとして10.1.1.254/24をそれぞれ設定
-#ip lan1 address 10.1.1.254/24
-#ip lan2 address 192.168.136.150/24
*GUIからの設定を許可する [#p53f726b]
-#httpd service on
-#httpd host lan2 //lan2の代わりにanyなども指定可
*DHCP設定 [#d7924296]
-#dhcp service server
-#dhcp scope 1 10.1.1.1-10.1.1.253/24
-#dns server 192.168.136.200
-#dns notice order dhcp server
-#dhcp scope option 1 dns=10.1.1.254
*NAT設定 [#we592d31]
-インターフェースにNATの設定を有効化する設定を施す。
--ip lan2 nat descriptor 1
-NATの種類を定義する
--nat descriptor type 1 masquerade //今回はマスカレード...
-外側アドレスを指定する
--nat descriptor address outer 1 primary
-内側アドレスを指定する
--nat descriptor address inner 1 auto
*IP FILTER設定 [#idf052c6]
-フィルターを設定する
--ip filter 1 pass * * icmp //ping
--ip filter 2 pass * * * ftpdata-21
--ip filter 3 pass * * * 22
--ip filter 4 reject * * * telnet
--ip filter 5 pass * * * domain
--ip filter 6 pass * * * www
--ip filter 7 pass * * * ntp
--ip filter 8 pass * * * https
-フィルターを適用する
--ip lan1 secure filter in 1 2 3 4 5 6 7 8
-セットフィルターを介する
--ip filter set ACL in 1 2 3 4 5 6 7 8
--ip lan1 secure filter name ACL
----
-http://jehupc.exblog.jp/17217310/
-http://jp.yamaha.com/products/network/solution/two_point...
-https://www.google.co.jp/search?q=xtr1100#hl=ja&safe=off...
RTX1100 Rev.8.03.87 (Tue Dec 15 17:14:12 2009)
Copyright (c) 1994-2009 Yamaha Corporation. All Rights ...
Copyright (c) 1991-1997 Regents of the University of Ca...
Copyright (c) 1995-2004 Jean-loup Gailly and Mark Adler.
Copyright (c) 1998-2000 Tokyo Institute of Technology.
Copyright (c) 2000 Japan Advanced Institute of Science ...
Copyright (c) 2002 RSA Security Inc. All rights reserved.
Copyright (c) 1997-2004 University of Cambridge. All ri...
Copyright (C) 1997 - 2002, Makoto Matsumoto and Takuji ...
Copyright (c) 1995 Tatu Ylonen , Espoo, Finland All rig...
Copyright (c) 1998-2004 The OpenSSL Project. All right...
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) ...
Copyright (c) 2006 Digital Arts Inc. All Rights Reserved.
00:a0:de:30:c9:03, 00:a0:de:30:c9:04, 00:a0:de:30:c9:05,
Memory 32Mbytes, 3LAN, 1BRI
# RTX1100 Rev.8.03.87 (Tue Dec 15 17:14:12 2009)
# MAC Address : 00:a0:de:30:c9:03, 00:a0:de:30:c9:04, 00...
# Memory 32Mbytes, 3LAN, 1BRI
# main: RTX1100 ver=c0 serial=N1A013314 MAC-Address=00:...
# Reporting Date: Jul 27 18:52:07 2012
login password encrypted *
administrator password encrypted *
timezone +09:00
ip routing on
ip route default gateway 192.168.136.254
ip lan1 address 10.1.1.254/24
ip lan2 address 192.168.136.150/24
ip lan2 nat descriptor 1
nat descriptor type 1 nat
nat descriptor address outer 1 192.168.136.150
nat descriptor address inner 1 10.1.1.254
nat descriptor static 1 1 192.168.136.150=10.1.1.254 1
dhcp service server
dhcp scope 1 10.1.1.1-10.1.1.253/24
dhcp scope option 1 dns=10.1.1.254
dns server 192.168.136.200 192.168.136.201
dns notice order dhcp me server
# show ip route
宛先ネットワーク    ゲートウェイ    ...
default             192.16...
10.1.1.0/24         10.1.1.254  ...
192.168.136.0/24    192.168.136.150   ...
[[:お仕事メモ]]
終了行:
#contents
*初期設定 [#x7914937]
-起動してみる。動作するなら問題なし。
-パスワードがわからないのでハードウェア側から初期化する。
**ハードウェアからの初期化 [#k467489e]
-背面パネルにあるINITボタンを押しながら電源を入れる。
-製品によってはリセットボタンを備えているので、INITボタン...
-//すべての設定を工場出荷時に戻す。
-以上
**ソフトウェアからの初期化 [#g26d8665]
-ログインできるのであれば以下のコマンドを実行する。
-#cold start //Password入力画面でパスワードを入力する。...
-//不揮発メモリを工場出荷時に戻して再起動する。
**再起動 [#h990158c]
-#restart //現在の不揮発メモリの内容に従い再起動する。
**パスワード設定 [#t5243317]
-コンソールパスワード
--#login password
-暗号化したコンソールパスワード
--#login password encrypted
-管理パスワード
--#administrator password
-暗号化した管理パスワード
--#administrator password encrypted
**ログインタイマーを伸ばす [#j6ee4398]
-login timer 3000 //初期値300
*時刻設定 [#d69d9d77]
-タイムゾーンの設定
--#timezone JST //JST UTC(世界標準時)を指定する
-日付の設定
--#date 2012-07-25 //2012/07/25も可。yyyy-mm-dd or yyyy/...
-時刻の設定
--#time 15:45:00 //hh:mm:ss
-NTPによる設定
--#ntpdate 192.168.136.152 //NTPサーバのIPを指定する
*設定 [#s559115d]
-設定の保存
--#save //0-4の数値を指定することができる。
-設定の確認
--#show config //全体の確認。
--#show config list //保存した設定の確認。
-設定の消去
--#delete config 番号
*インターフェースにIPを割り当てる [#z0002d66]
LAN1=1-4, LAN2, LAN3の構成になっている
LAN2をWANとして192.168.136.150/24
LAN1をLANとして10.1.1.254/24をそれぞれ設定
-#ip lan1 address 10.1.1.254/24
-#ip lan2 address 192.168.136.150/24
*GUIからの設定を許可する [#p53f726b]
-#httpd service on
-#httpd host lan2 //lan2の代わりにanyなども指定可
*DHCP設定 [#d7924296]
-#dhcp service server
-#dhcp scope 1 10.1.1.1-10.1.1.253/24
-#dns server 192.168.136.200
-#dns notice order dhcp server
-#dhcp scope option 1 dns=10.1.1.254
*NAT設定 [#we592d31]
-インターフェースにNATの設定を有効化する設定を施す。
--ip lan2 nat descriptor 1
-NATの種類を定義する
--nat descriptor type 1 masquerade //今回はマスカレード...
-外側アドレスを指定する
--nat descriptor address outer 1 primary
-内側アドレスを指定する
--nat descriptor address inner 1 auto
*IP FILTER設定 [#idf052c6]
-フィルターを設定する
--ip filter 1 pass * * icmp //ping
--ip filter 2 pass * * * ftpdata-21
--ip filter 3 pass * * * 22
--ip filter 4 reject * * * telnet
--ip filter 5 pass * * * domain
--ip filter 6 pass * * * www
--ip filter 7 pass * * * ntp
--ip filter 8 pass * * * https
-フィルターを適用する
--ip lan1 secure filter in 1 2 3 4 5 6 7 8
-セットフィルターを介する
--ip filter set ACL in 1 2 3 4 5 6 7 8
--ip lan1 secure filter name ACL
----
-http://jehupc.exblog.jp/17217310/
-http://jp.yamaha.com/products/network/solution/two_point...
-https://www.google.co.jp/search?q=xtr1100#hl=ja&safe=off...
RTX1100 Rev.8.03.87 (Tue Dec 15 17:14:12 2009)
Copyright (c) 1994-2009 Yamaha Corporation. All Rights ...
Copyright (c) 1991-1997 Regents of the University of Ca...
Copyright (c) 1995-2004 Jean-loup Gailly and Mark Adler.
Copyright (c) 1998-2000 Tokyo Institute of Technology.
Copyright (c) 2000 Japan Advanced Institute of Science ...
Copyright (c) 2002 RSA Security Inc. All rights reserved.
Copyright (c) 1997-2004 University of Cambridge. All ri...
Copyright (C) 1997 - 2002, Makoto Matsumoto and Takuji ...
Copyright (c) 1995 Tatu Ylonen , Espoo, Finland All rig...
Copyright (c) 1998-2004 The OpenSSL Project. All right...
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) ...
Copyright (c) 2006 Digital Arts Inc. All Rights Reserved.
00:a0:de:30:c9:03, 00:a0:de:30:c9:04, 00:a0:de:30:c9:05,
Memory 32Mbytes, 3LAN, 1BRI
# RTX1100 Rev.8.03.87 (Tue Dec 15 17:14:12 2009)
# MAC Address : 00:a0:de:30:c9:03, 00:a0:de:30:c9:04, 00...
# Memory 32Mbytes, 3LAN, 1BRI
# main: RTX1100 ver=c0 serial=N1A013314 MAC-Address=00:...
# Reporting Date: Jul 27 18:52:07 2012
login password encrypted *
administrator password encrypted *
timezone +09:00
ip routing on
ip route default gateway 192.168.136.254
ip lan1 address 10.1.1.254/24
ip lan2 address 192.168.136.150/24
ip lan2 nat descriptor 1
nat descriptor type 1 nat
nat descriptor address outer 1 192.168.136.150
nat descriptor address inner 1 10.1.1.254
nat descriptor static 1 1 192.168.136.150=10.1.1.254 1
dhcp service server
dhcp scope 1 10.1.1.1-10.1.1.253/24
dhcp scope option 1 dns=10.1.1.254
dns server 192.168.136.200 192.168.136.201
dns notice order dhcp me server
# show ip route
宛先ネットワーク    ゲートウェイ    ...
default             192.16...
10.1.1.0/24         10.1.1.254  ...
192.168.136.0/24    192.168.136.150   ...
[[:お仕事メモ]]
ページ名: